ART Tube MP Microphone Preamp (Model 127)
ART Tube MP Microphone Preamp (Model 127)
The Tube MP is the world's most popular external tube microphone preamp. Whether you're working with a 4-track, hard-disk, or digital multi-track recorder, the Tube MP's TEC award nominated design will allow you to obtain professional recording studio results at a fraction of the cost of comparable equipment. The hybrid design of the Tube MP allows it to add warmth and fatness to a signal while maintaining exceptionally low-noise and high quality.


ART Tube Pac Microphone Preamp and Compressor (Model 131)
ART Tube Pac Microphone Preamp and Compressor (Model 131)
The Tube PAC from ART is a combination of the world's most popular tube mic/line preamplifier and optical tube compressor. ART engineers took the Tube MP and Tube Compressor and combined them into a single convenient aircraft-quality, extruded aluminum chassis. This new table-top design allows for easy placement in the studio or on the stage, with immediate access to all the controls, features, and metering.


ART Pro VLA Compressor (Model 212)
ART Pro VLA Compressor (Model 212)
The PRO VLA (Vactrol-based Leveling Amplifier) is a multi-purpose tool for audio engineering and recording. Enclosed in a 2U (3.5" high) rack-mountable chassis are 2 independent channels of analog leveling/compression designed to work seamlessly with any recording, sound-reinforcement, or electronic instrument setup.


ART Pro Channel Microphone Preamp and Compressor (Model 215)
ART Pro Channel Microphone Preamp and Compressor (Model 215)
The Pro Channel from ART is the latest offering from the world's most popular tube dynamics processing manufacturer. ART engineers have combined the world-renowned Pro MPA, Pro VLA, and Tube EQ into a single product - creating the world's best-sounding and most affordable professional recording channel.


ART Dual 15 Band Equalizer (Model 341)
ART Dual 15 Band Equalizer (Model 341)
ART's 341 Dual-Channel, 15-band, 2/3-octave graphic equalizer features: constant Q circuitry with a 3% center frequency accuracy, 20mm center detent sliders, selectable boost/cut range of 6dB or 12dB, active balanced and unbalanced input and output connections, internal power supply, and so much more. The rugged, all-steel constructed chassis occupies 1U rack space and is intended for installation in standard 19" equipment racks.


ART Dual 31 Band Equalizer (Model 355)
ART Dual 31 Band Equalizer (Model 355)
The Model 355 Dual 31-band, 1/3-octave Graphic Equalizer may be used in a variety of applications such as live sound, recording studios, instrument racks, DJ sound systems, and fixed equipment installations. Designed to interface into any audio system, the Model 355 is a powerful tool for solving audio problems and creating interesting sound textures.


ART C126 12VDC Power Supply for Phantom II
ART C126 12VDC Power Supply for Phantom II
Why risk running out of batteries mid-session -- or worse, getting a phantom power 'brown-out' in the middle of a take? Why keep spending on 9V batteries at all when you can have constant, reliable power? If you have the Phantom II, you ought to have this.


ART ABY Cool Switch Pedal
ART ABY Cool Switch Pedal
A/B-Y switching works two ways. It lets you switch a common source signal (guitar, bass or keyboard) between two amplifiers or amp channels. Or conversely, it lets you switch two source signals (ie, two different guitars) into the same amplifier. A good quality A/B-Y switcher will also provide LEDs or other indicators to show whether A, B or Y routing is in effect. The Y routing combines both the A and B outputs in parallel so that two amplifiers can be driven at once. The Coolswitch provides full A/B-Y switching functionality, plus parallel Common in/out jacks.


ART DeeJayPreII Phono Preamp with RIAA EQ Curve
ART DeeJayPreII Phono Preamp with RIAA EQ Curve
The DJ PRE II is a high quality phono preamp designed for your home and studio. It acts as an interface between your turntable and your audio recording system. The analog input capacitance can be switched between 100pf and 200pf to optimize your phono cartridge response. A switchable low cut filter removes rumble while leaving the audio pristine. The front gain trim control and signal/clip LED allow you to optimize the preamps gain for a wide range of input sources.


ART DPSII Digital Preamplifier System
ART DPSII Digital Preamplifier System
Twin high performance discrete preamplifiers with local feedback are coupled with flexible V3(Variable Valve Voicing) 12AX7A gain stage (which delivers both flexibility and consistency in settings) and choice of analog and digital outputs.


ART DTI Hum Eliminator
ART DTI Hum Eliminator
The DTI (Dual Transformer/Isolater) is a high-quality, totally passive audio interface that uses a pair of high-performance transformers to totally separate input and output signal grounds, thereby isolating two systems and reducing hum and ground-loop noise. The DTI's audio transformers have an extremely flat and wide frequency response and can handle high signal levels while maintaining an isolated balanced output.


ART HeadAmp4 4-Channel Headphone Amplifier
ART HeadAmp4 4-Channel Headphone Amplifier
Ideal for virtually any home or project studio, the ARTcessories HeadAmp4 easily adds additional headphone outputs to any mixer, computer audio interface, workstation, iPod, media player or laptop without creating any additional load on the existing headphone source.


ART HQ231 Dual 31-Band Equalizer with Feedback Finder
ART HQ231 Dual 31-Band Equalizer with Feedback Finder
The newest member of the HQ Series, HQ 231, features ART's FDC Feedback Detection Circuitry. The ART proprietary FDC differs from similar systems in that it is extremely fast. Although it illuminates the band with the greatest energy with the brightest LED, it doesn't fully discriminate between bands and will not get "stuck" on one band when there is no signal.


ART Digital MPA Solid Gold Microphone Preamplifier
ART Digital MPA Solid Gold Microphone Preamplifier
Applied Research and Technology introduces the Digital MPA Tube Microphone Preamplifier - the first member of the forthcoming Digital Innovations Series. The Digital MPA is one of the finest microphone pre-amps with digital capability available. The new enhanced discrete front end maintains every nuance, revealing incredible dynamic range. Their unique tube circuitry using 2 x 12AX7A tubes render unsurpassed detail and clarity with the broadest range of microphones.


ART MPA Gold Microphone Preamplifier
ART MPA Gold Microphone Preamplifier
Like the Digital MPA, the MPA Gold features Variable Input Impedance. Variable Input Impedance is intended to optimize the MPA Gold for the widest range of microphones. Variation of the input impedance of a microphone preamplifier changes the load against which the microphone has to push. This variation dramatically alters the performance of a microphone, and creates numerous sonic possibilities for microphone performance. The variable impedance control of the MPA Gold is infinitely variable, as opposed to steps. This allows users much finer control over the tuning of the impedance.


ART Phantom II Dual Phantom Power Adapter
ART Phantom II Dual Phantom Power Adapter
Condenser microphones usually specify different requirements for their phantom power. These ratings can range from 48 Volts all the way down to 9 Volts. Fortunately, there's a certain amount of flexibility with matching Phantom Power voltage to your mic.


ART Phantom III 48VDC Phantom Power Supply
ART Phantom III 48VDC Phantom Power Supply
A 24-volt condenser mic will run perfectly on 48 volts. In fact, mics rated at as little as 9 volts can often operate on 48 volts, but you should check with the manufacturer first. Conversely, a mic will generally perform best driven by not less than its rated voltage so, for a 48-volt mic, you would obtain best results with 48 volts of phantom power. The Phantom III is a great choice for these needs.


ART PS4X4 Dual Metered Power Distribution Unit
ART PS4X4 Dual Metered Power Distribution Unit
Built into the PS 4x4 is a surge and spike protection system, designed to protect powered equipment from harmful electric surges and spikes. The unit also has RFI and EMI filtering, a 15 amp breaker, and a total power capacity of 1800 watts. The PS 4x4 also features a front-located on/off power switch (which lights up when turned on), and a front-mounted circuit breaker reset switch. The rugged, all-steel chassis occupies 1U rack spaces and is intended for installation into standard 19 in. equipment racks.


ART SLA1 Power Amplifier (2x100 Watts)
ART SLA1 Power Amplifier (2x100 Watts)
The SLA-1 Studio Linear Amplifier is a robust yet compact power amplifier designed for studio and even live applications. It has been designed and engineered to provide clean, quiet power and excellent sound with ultra-low noise and distortion.


ART SLA2 Power Amplifier (2x200 Watts)
ART SLA2 Power Amplifier (2x200 Watts)
ART's latest amplifier stems from the success of their popular 100-watt SLA-1. For all of you power-hungry audio enthusiasts, ART presents to you the more powerful SLA-2. The SLA-2 is a studio linear power amp that delivers 200 watts of clean, clear power, and will help reproduce your mixes with near-pinpoint accuracy inside a single rack space.


ART SP4x4 Metered Power Distribution Unit
ART SP4x4 Metered Power Distribution Unit
The SP 4x4 features a backlit linear meter to monitor input voltage, which gives the user a familiar analog-style readout when monitoring voltage from a power source. The SP 4x4 also features ART's "4x4" distribution on the back of the unit -- four of the eight rear outputs are 1.25 in. apart. This allows the user to plug in wide power cables and multiple wall wart devices while still having eight total power outlets to choose from.


ART T8 8-Channel Transformer/Isolator
ART T8 8-Channel Transformer/Isolator
The T8 (Transformer Eight) is a totally passive audio interface that uses 8 transformers to separate input and output signal grounds, thereby isolating two systems and reducing hum and ground-loop noise. The T8's audio transformers have flat and wide frequency response and handle high signal levels while maintaining an isolated balanced output. The transformers are wound for 1:1 unity gain and are designed to be used with impedances from 600 ohms to 100k ohms.


ART Tube MP Project Series Microphone Preamp
ART Tube MP Project Series Microphone Preamp
The Tube MP Project Series is a professional quality audio interface that lets you connect microphone, instrument, and line level signals to a mixer or other audio input. This hybrid design is the latest in a long line of ART tube preamps. They took the legendary Tube MP series and updated every aspect of the design, inside and out, while still maintaining a compact, reliable, and cost effective product.


ART TubeMP USB Microphone Preamp
ART TubeMP USB Microphone Preamp
The Tube MP Project Series is a professional quality audio interface that lets you connect microphone, instrument, and line level signals to audio inputs to digital audio workstations as well as standard analog devices. We took our legendary Tube MP series and updated every aspect of the design, inside and out, while still maintaining a compact, reliable, cost effective product, and added a USB output.


ART TPSII 2-Channel Tube Preamp System
ART TPSII 2-Channel Tube Preamp System
The TPS II's 2-channel high performance mic preamp is coupled with ART's proprietary V3(tm) (Variable Valve Voicing) for complete versatility and famousn ART high quality. The TPS II also features variable input impedance so you can dial in and match any mic type from large condensers to ribbon mics.


ART USB Phono Plus V2 RIAA Phono Preamp
ART USB Phono Plus V2 RIAA Phono Preamp
The USBPhonoPlus v2 is the ideal low cost interface solution for transferring any analog or digital audio source, including a turntable into a computer via standard USB connection.


ART Tube MP Studio V3
ART Tube MP Studio V3
The Tube MP Studio V3 features ART's new V3 (Variable Valve Voicing) Technology - found only in ART microphone preamplification systems.


ART ZDirect Passive DI
ART ZDirect Passive DI
The Zdirect is a high-quality, totally passive interface that lets you connect instrument-, line-, or speaker-level signals to a mixer or other balanced input through a high-performance audio isolation transformer. The high impedance single-ended 1/4 in. input is converted by the transformer into an isolated balanced low impedance signal source.